In this article, I’ll give you an ultimate list of the best DLL decompilers. These tools will enable you to decompile DLL (Dynamic-link library) files to view the C#, VB.NET, or C++ source code. Decompiling a .dll file is helpful if you want to understand how it works without having access to the original source code.
Basically, to decompile a .dll file you must know the language in which the DLL was written. So, to make things easier for you, I have arranged the DLL decompilers according to the programming languages.
The list contains free, paid, open source, and online DLL decompilers.
Let’s have a look at each of them and then choose the best option that meets your specific requirements.
dotPeek is a free-of-charge standalone tool based on ReSharper‘s bundled decompiler. It can reliably decompile any .NET assembly into equivalent C# or IL code.
The decompiler supports multiple formats including libraries (.dll), executables (.exe), and Windows metadata files (.winmd).
dotPeek can also decompile .baml files, enabling you to reconstruct XAML UI definitions.
In addition to traditional assemblies and executables, you can have dotPeek open archives (.zip, .vsix, or .nupkg) and folders. You can also find and load NuGet packages (and their dependencies) from any online package source, or load packages listed in packages.config file in your Visual Studio project.
Telerik JustDecompile is one of the fastest decompilers for DLL files which are coded in .NET and C#. It offers an open API for everyone to create extensions. You can easily search the code once it is decompiled with JustDecompile.
The Telerik JustDecompile engine is open source. It means you can easily extend its functionality as well as leverage everyone else’s fixes and additions.
ILSpy is the open-source .NET assembly browser and decompiler.
Decompile, understand, and fix any .NET code, even if you don’t have the source. By using .NET Reflector you can easily look inside any .NET code.
dnSpy is a debugger and .NET assembly editor. You can use it to edit and debug assemblies even if you don’t have any source code available. Main features:
Decompile programs in EXE, DLL, or OCX formats created using Visual Basic 5.0 and 6.0 and disassemble software built with .NET technology. Perform the analysis of programs and partially restore the source code from p-code if your project was damaged.
The freeware Refractor .NET assembly browser and decompiler recover source code from crashes and convert .exe and .dll to C#, VB.Net, and IL. It generates the high-level code in the back end of the decompilation. Just as a compiler may have several backends for generating machine code for different architectures, the decompiler(the free disassembler) has several backends for generating high-level code in different high-level languages.
The typical problem with decompilation is the absence of full source information in the executable file. For instance, the .NET assembly does not contain the names of local variables. The program can automatically assign local names in accordance with their types (what Dis# really does), but it still too differentiates from the original source.
Support for C#, Visual Basic.NET, Delphi.NET, and Chrome. Dis# also support .NET 2.0 assembly format, generics, etc.
You can deobfuscate assembly to restore readable names.
Dis# extracts names from .PDB file.
Dotnet IL Editor (DILE) allows disassembling and debugging .NET 1.0/1.1/2.0/3.0/3.5/4.0 applications without source code or .pdb files. It can debug even itself or the assemblies of the .NET Framework on IL level.
DLL to C is a tool that can convert any DLL files and some EXE files into compilable C/C++ code. When you lost the source code of a DLL, you can recover the source code with DLL to C. It can generate data structures for all data sections and disassemble the code section. It can also generate a Function Relationship Tree, and then you can export the specified feature you want in the DLL easily. And it can convert assembly code to C code, and the C code is also compilable and reliable.
The Hex-Rays Decompiler brings binary software analysis within reach of millions of programmers. It converts native processor code into a readable C-like pseudocode text.
In comparison to low-level assembly language, high-level language representation in the Decompiler has several advantages:
The pseudocode text is generated on the fly. Their technology is fast enough to analyze 99% of functions within a couple of seconds.
Currently, the decompiler supports compiler-generated code for the x86, x64, ARM32, ARM64, and PowerPC processors. They plan to port it to other platforms in the future. The programmatic API allows their customers to improve the decompiler output. Vulnerability search, software validation, and coverage analysis are the directions that immediately come to mind.
The decompiler runs on Windows, Linux, and Mac OS X. The GUI and text IDA versions are supported.
The Decompiler software is available for 8 platforms:
W32DASM is a disassembler: a tool made to translate machine language back into assembly language. It’s ideal for those interested in reverse engineering, who want to take code apart and find out how it works.
It is an easy-to-use disassembler with a simple interface.
With this app, you can open .dll, .exe, .386, .com, .cpl, .drv, .fon, .mpd, .ocx, .vbx and .vxd files to study their code. It makes it possible to save the disassembly text and create a project file, attach the active 32-bit process to the debugger, and load the 32-bit disassembled executable file into the process.
Although W32DASM is ancient since hasn’t received updates for a very long time (it’s officially discontinued), it works without any trouble on Windows 10. Files are disassembled quickly while the tool remains light on system resource consumption.
Snowman is a native code to C/C++ decompiler, supporting x86, AMD64, and ARM architectures. You can use it as a standalone GUI application, a command-line tool, an IDA plug-in, a radare2 plug-in, an x64dbg plug-in, or a library. Snowman is free software.
.plw, .p64, .plx, .dll, .so files to IDA’s plugins directory.Ctrl-E instead. Or better use the Snowman IDA plug-in.F3 to decompile the function under the cursor.SmartDec is a set of tools for decompilation. These tools are:
Free Dll Viewer is a program that lets you visualize DLL (Dynamic Link Library) files. These files are libraries that contain functions and resources shared by various programs. So, instead of each developer writing code, they use these libraries to save time.
This program also offers support for EXE, DRV, OCX, and FON. In the end, all these files are executables. The program lets you see resources like Cursors, Bitmaps, Icons, Dialog, Menus, etc. contained in files. All this while occupying less than 1 MB on your disk.
The graphic interface might not seem so attractive, but the viewing functionality of the program is great. It doesn’t just let you see the resources, but it also offers useful information about the DLL in the lower part of the window, like the size of the header and check sum. Unfortunately, it doesn’t offer capabilities other than just viewing the resources. It would have been nice to see the functions these files can perform when called by applications, or editing capabilities.
Since this is a newly developed program, we can expect to see some improvements over time. Otherwise, we can’t expect to see the popularity of the program grow.
Detect and inspect various DLL files in your system. Open and edit binary resources, view their content, and ensure the compatibility of specific items with the general settings of your computer. Preview the results and automatically adjust the number of bytes per line.
DLL Player is a software tool for exploring PE (Portable Executable) files (EXE, DLL).
With DLL Player, you can inspect all DLL files, edit as binary (hex) resources.
DLL Player is a simple tool for helping you view and edit DLL files on the go..
DLL Player is a great tool hex editor and also it’s free.
DLL Player can be used in Windows XP, Windows Vista and Windows 7. It is a fast download and does not take up much space.
Our software is specifically designed for users to quickly open a DLL/Exe file — it has a simple interface and the basic features allows users to just edit/view DLL files without any trouble.
Explore, analyze and edit your executable files. The tool works with formats such as EXE, ActiveX, DLL, or SYS designed for 32-bit operating systems. It embeds several tools such as a Win32 Disassembler, a Dependency Scanner, a UPX Unpacker, a Visual Resource Editor, and a DLL Export Viewer.
PE Explorer is a tool for inspecting and editing the inner workings of Windows 32-bit executable files. It offers a look at the PE file structure and all of the resources in the file, and reports multiple details about a PE file (EXE, DLL, ActiveX controls, and several other Windows executable formats).
Hopper Disassembler, the reverse engineering tool that lets you disassemble, decompile and debug your applications.
This disassembler is available for macOS and Linux.
Cutter is a free and open-source reverse engineering platform powered by rizin. It aims at being an advanced and customizable reverse engineering platform while keeping the user experience in mind. Cutter is created by reverse engineers for reverse engineers.
The best-of-breed binary code analysis tool is an indispensable item in the toolbox of world-class software analysts, reverse engineers, malware analysts, and cybersecurity professionals.
IDA Pro as a disassembler is capable of creating maps of their execution to show the binary instructions that are actually executed by the processor in a symbolic representation (assembly language). Advanced techniques have been implemented into IDA Pro so that it can generate assembly language source code from machine-executable code and make this complex code more human-readable.
The debugging feature augmented IDA with the dynamic analysis. It supports multiple debugging targets and can handle remote applications. Its cross-platform debugging capability enables instant debugging, easy connection to both local and remote processes, and support for 64-bit systems and new connection possibilities.
Ghidra is a software reverse engineering (SRE) framework created and maintained by the National Security Agency Research Directorate. This framework includes a suite of full-featured, high-end software analysis tools that enable users to analyze compiled code on a variety of platforms including Windows, macOS, and Linux. Capabilities include disassembly, assembly, decompilation, graphing, and scripting, along with hundreds of other features. Ghidra supports a wide variety of processor instruction sets and executable formats and can be run in both user-interactive and automated modes. Users may also develop their own Ghidra extension components and/or scripts using Java or Python.
In support of the NSA’s Cybersecurity mission, Ghidra was built to solve scaling and teaming problems on complex SRE efforts, and to provide a customizable and extensible SRE research platform. NSA has applied Ghidra SRE capabilities to a variety of problems that involve analyzing malicious code and generating deep insights for SRE analysts who seek a better understanding of potential vulnerabilities in networks and systems.
We evaluated the performance of Llama 3.1 vs GPT-4 models on over 150 benchmark datasets…
The manufacturing industry is undergoing a significant transformation with the advent of Industrial IoT Solutions.…
If you're reading this, you must have heard the buzz about ChatGPT and its incredible…
How to Use ChatGPT in Cybersecurity If you're a cybersecurity geek, you've probably heard about…
Introduction In the dynamic world of cryptocurrencies, staying informed about the latest market trends is…
The Events Calendar Widgets for Elementor has become easiest solution for managing events on WordPress…